[PATCHv2] i.MX6-SabreAuto: WEIM: add steering-gpios to set WEIM for NOR

From: Alison Chaiken <redacted>

The EIM switch of the i.MX6 SabreAuto CPU cards can connect pins
EIM_D18 and EIM_D30 of the CPU to either the parallel NOR or to other
peripherals.  Add a steering-gpios property to the imx6qdl-sabreauto
device-tree to allow boot-time configuration of the EIM.  Use GPIO5,
pin 4 to connect EIM_D18 to the NOR so the do_map_probe() function
correctly detects the CFI.

Support is not added for boot-time steering of EIM_D30 due to present
inability to test.

Alison Chaiken (1):
  i.MX6-SabreAuto: WEIM: add steering-gpios to set WEIM for NOR

 Documentation/devicetree/bindings/bus/imx-weim.txt | 10 +++++
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi           |  1 +
 drivers/bus/imx-weim.c                             | 46 ++++++++++++++++++++++
 3 files changed, 57 insertions(+)

-- 
2.1.4