[PATCH v3] ARM: at91/dt: sam9263: Add ac97 device node
From: Alexander Stein <hidden>
Date: 2015-01-08 19:12:04
Also in:
linux-devicetree
Possibly related (same subject, not in this thread)
- 2015-01-26 · Re: [PATCH v3] ARM: at91/dt: sam9263: Add ac97 device node · Nicolas Ferre <hidden>
- 2014-12-29 · [PATCH v3] ARM: at91/dt: sam9263: Add ac97 device node · Alexander Stein <hidden>
Now that the implementation has been applied to sound/for-next (https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/log/?h=for-next ), who is going to pick the related patches (this one and the other two adding documentation and default config)? Best regards, Alexander On Monday 29 December 2014, 13:08:41 wrote Alexander Stein:
quoted hunk
This adds the device node for the ac97 controller. Signed-off-by: Alexander Stein <redacted> Acked-By Alexandre Belloni [off-list ref] --- Changes in v3: * Renamed the compatible string to atmel,at91sam9263-ac97c * Added 'Acked-By Alexandre Belloni [off-list ref]' arch/arm/boot/dts/at91sam9263.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 6283785..2e67e38 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi@@ -700,6 +700,16 @@ }; }; + ac97 { + pinctrl_ac97: ac97-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A AC97FS pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A AC97CK pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A AC97TX pin */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A AC97RX pin */ + }; + }; + pioA: gpio at fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>;@@ -828,6 +838,17 @@ status = "disabled"; }; + ac97: sound at fffa0000 { + compatible = "atmel,at91sam9263-ac97c"; + reg = <0xfffa0000 0x4000>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ac97>; + clocks = <&ac97_clk>; + clock-names = "ac97_clk"; + status = "disabled"; + }; + macb0: ethernet at fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>;