[PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command.
From: Suman Tripathi <hidden>
Date: 2015-01-06 08:21:15
Also in:
linux-devicetree, linux-ide, linux-scsi
Possibly related (same subject, not in this thread)
- 2014-12-29 · Re: [PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command. · Sergei Shtylyov <hidden>
- 2014-12-17 · Re: [PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command. · Sergei Shtylyov <hidden>
- 2014-12-16 · Re: [PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command. · Sergei Shtylyov <hidden>
Hi On Tue, Dec 16, 2014 at 10:19:35PM +0530, Suman Tripathi wrote:
This patch addresses the issue with ATA_CMD_PACKET pio mode command for enumeration and device detection with ATAPI devices.It is the same issue as in patch www.spinics.net/lists/linux-ide/msg49092.html Signed-off-by: Suman Tripathi <redacted>
Applied 1-2 to libata/for-3.18-fixes w/ Sergei's suggested edits. The patch is applied to libata/for-3.19-fixes not libata/for-3.18-fixes ?? On Mon, Jan 5, 2015 at 7:29 PM, Tejun Heo [off-list ref] wrote:
On Tue, Dec 16, 2014 at 10:19:35PM +0530, Suman Tripathi wrote:quoted
This patch addresses the issue with ATA_CMD_PACKET pio mode command for enumeration and device detection with ATAPI devices.It is the same issue as in patch www.spinics.net/lists/linux-ide/msg49092.html Signed-off-by: Suman Tripathi <redacted>Applied 1-2 to libata/for-3.18-fixes w/ Sergei's suggested edits. Thanks. -- tejun
-- Thanks, with regards, Suman Tripathi CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and contains information that is confidential and proprietary to Applied Micro Circuits Corporation or its subsidiaries. It is to be used solely for the purpose of furthering the parties' business relationship. All unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.