[PATCH 1/3] ASoC: atmel_ssc_dai: fix the setting for DSP mode
From: Bo Shen <hidden>
Date: 2015-01-30 09:41:05
Also in:
alsa-devel, linux-sound, lkml
Subsystem:
sound, sound - soc layer / dynamic audio power management (asoc), the rest · Maintainers:
Jaroslav Kysela, Takashi Iwai, Liam Girdwood, Mark Brown, Linus Torvalds
When SCC work in DSP A mode, the data outputs/inputs are shift out on falling edge, the frame sync are sample on the rising edge. Reported-by: Songjun Wu <redacted> Signed-off-by: Bo Shen <redacted> --- sound/soc/atmel/atmel_ssc_dai.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 99ff35e..c1d93b8 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c@@ -512,7 +512,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | SSC_BF(RCMR_STTDLY, 1) | SSC_BF(RCMR_START, SSC_START_RISING_RF) - | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKI, SSC_CKI_FALLING) | SSC_BF(RCMR_CKO, SSC_CKO_NONE) | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
@@ -527,7 +527,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | SSC_BF(TCMR_STTDLY, 1) | SSC_BF(TCMR_START, SSC_START_RISING_RF) - | SSC_BF(TCMR_CKI, SSC_CKI_RISING) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
@@ -556,7 +556,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, rcmr = SSC_BF(RCMR_PERIOD, 0) | SSC_BF(RCMR_STTDLY, START_DELAY) | SSC_BF(RCMR_START, SSC_START_RISING_RF) - | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKI, SSC_CKI_FALLING) | SSC_BF(RCMR_CKO, SSC_CKO_NONE) | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ? SSC_CKS_PIN : SSC_CKS_CLOCK);
--
2.3.0.rc0