Thread (20 messages) 20 messages, 4 authors, 2015-01-31

[PATCH v5 00/13] AT91 pm cleanup for 3.20

From: Yang, Wenyou <hidden>
Date: 2015-01-30 07:36:05
Also in: lkml

Hi Nicolas,
-----Original Message-----
From: Ferre, Nicolas
Sent: Thursday, January 29, 2015 9:09 PM
To: Yang, Wenyou; linux at arm.linux.org.uk
Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
alexandre.belloni at free-electrons.com; sylvain.rochet at finsecur.com;
peda at axentia.se; sergei.shtylyov at cogentembedded.com; linux at maxim.org.za
Subject: Re: [PATCH v5 00/13] AT91 pm cleanup for 3.20

Le 29/01/2015 07:35, Wenyou Yang a ?crit :
quoted
Hi Nicolas,

This version is rebased on the branch: at91-3.20-cleanup of the repository
	git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git

It is purpose to clean up the PM code, includes the patches from Peter Rosin
and Sylvain Rochet.
quoted
Since verifying the USB clock and USB PLL disabling before suspending
to memory, it aslo depends on the following patch serials from Sylvain:
	[PATCHv6 0/5] USB: gadget: atmel_usba_udc: Driver improvements
	[PATCHv7 0/6] USB: host: Atmel OHCI and EHCI drivers improvements

Removes CONFIG_AT91_SLOW_CLOCK config item to simply the PM config,
The suspend to standby mode uses the same sram function as the suspend to
memory mode.
quoted
Remove some unused code.

Alexandr & Sylvain, Thank you very much for so many feedbacks.
Wenyou,

I'm sorry but the PM "cleanup" and "improvement" series won't be merged for 3.20
(so you can remove this from the series subject). The series are pretty big,
address a sensitive aspect of the chips and are not completely ready. So I
propose to slow down the pace of versions and focus on these two objectives:

1/ try to extract a handful of patches that could be sent as "fixes" for
3.20 (no more than 5-6 patches). If they are enough urgent, I can try to add them to
an early "fixes" branch during the 3.20 stabilization process.
OK, I will send some stable patches.
2/ try to figure out if from this big amount of assembly code can't be extracted
some parts that can be converted to C or parts that can use ARM common code
(for cache management for instance).
Yes, I need dig deeply the cache code.
During 3.21 development phase, we will come back to the "cleanup" series and
prepare something that can host the sama5 PM support. Finally we will add
sama5d3/sama5d4 PM enhancements.

quoted
Changes in v5:
 - Rebase the branch: at91-3.20-cleanup HEAD:fa9df37

Changes in v4:
 - Clear unused state argument in at91_pm_verify_clocks()
 - Remove pr_info("AT91:... slow_clock ? ..") in patch 07/13.

Changes in v3
 - Sylvain splits the patch in two
 - Add handling if no sram allocated for PM
 - Retain the STANDBY and SUSPEND_MEM select in at91_pm_enter.

Changes in v2:
 - Rebase on the at91-3.20-cleanup branch
 - Recover the verify clock condition, only for suspend to memory.
 - Collect ACK from Alexandre
 - Add the macro for PM mode

Peter Rosin (1):
  pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

Sylvain Rochet (2):
  pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts
  pm: at91: pm_slowclock: remove clocks which are already stopped when
    entering slow clock mode

Wenyou Yang (10):
  pm: at91: pm_slowclock: remove the unused code related with
    SLOWDOWN_MASTER_CLOCK
  pm: at91: move the copying the sram function to the sram
    initializationi phase
  ARM: at91: move select SRAM to ARCH_AT91
  pm: at91: remove the config item CONFIG_AT91_SLOW_CLOCK
  pm: at91: the standby mode uses the same sram function as the suspend
    to memory mode
  pm: at91: rename file name: pm_slowclock.S -->pm_suspend.S
  pm: at91: rename function name:
    at91_slow_clock()-->at91_pm_suspend_sram_fn
  pm: at91: remove the at91_xxx_standby() function definitions in the
    pm.h
  pm: at91: remove the data member at91_xxx_standby() of struct
    ramc_ids
  pm: at91: amend the pm_suspend entry for at91_cpuidle_device

 arch/arm/mach-at91/Kconfig         |   17 +-
 arch/arm/mach-at91/Makefile        |    2 +-
 arch/arm/mach-at91/pm.c            |  166 +++++++++---------
 arch/arm/mach-at91/pm.h            |  100 +----------
 arch/arm/mach-at91/pm_slowclock.S  |  323 ------------------------------------
 arch/arm/mach-at91/pm_suspend.S    |  277
+++++++++++++++++++++++++++++++
quoted
 include/soc/at91/at91sam9_ddrsdr.h |    2 +-
 7 files changed, 366 insertions(+), 521 deletions(-)  delete mode
100644 arch/arm/mach-at91/pm_slowclock.S  create mode 100644
arch/arm/mach-at91/pm_suspend.S

--
Nicolas Ferre
Best Regards,
Wenyou Yang
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help