[PATCH 2/2] ARM: zynq: DT: Add pinctrl information to USB nodes
From: Soren Brinkmann <hidden>
Date: 2015-01-26 19:50:41
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Signed-off-by: Soren Brinkmann <redacted> --- Hi Michal, This could be squashed into 1643b31658c4 'ARM: zynq: DT: Add USB to device tree' if you decide to rebuild the zynq/dt branch. S?ren --- arch/arm/boot/dts/zynq-zc702.dts | 26 ++++++++++++++++++++++++++ arch/arm/boot/dts/zynq-zc706.dts | 26 ++++++++++++++++++++++++++ 2 files changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 4f8835be4874..483f69ba2cf5 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts@@ -312,6 +312,30 @@ bias-disable; }; }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; }; &sdhci0 {
@@ -330,4 +354,6 @@ status = "okay"; dr_mode = "host"; usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; };
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 6979ce23175f..3a6260998116 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts@@ -261,6 +261,30 @@ bias-disable; }; }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; }; &sdhci0 {
@@ -279,4 +303,6 @@ status = "okay"; dr_mode = "host"; usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; };
--
2.2.2.1.g63c5777