[PATCH v2 4/5] usb: atmel_usba_udc: Mask status with enabled irqs
From: Boris Brezillon <hidden>
Date: 2015-01-06 13:48:17
Also in:
lkml
Subsystem:
microchip usba udc driver, the rest, usb subsystem · Maintainers:
Cristian Birsan, Linus Torvalds, Greg Kroah-Hartman
Avoid interpreting useless status flags when we're not waiting for such events by masking the status variable with the interrupt enabled register value. Reported-by: Patrice VILCHEZ <redacted> Signed-off-by: Boris Brezillon <redacted> --- drivers/usb/gadget/udc/atmel_usba_udc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 55c8dde..bc3a532 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c@@ -1612,12 +1612,14 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) spin_lock(&udc->lock); - status = usba_readl(udc, INT_STA); + status = usba_readl(udc, INT_STA) & usba_readl(udc, INT_ENB); DBG(DBG_INT, "irq, status=%#08x\n", status); if (status & USBA_DET_SUSPEND) { toggle_bias(udc, 0); usba_writel(udc, INT_CLR, USBA_DET_SUSPEND); + usba_writel(udc, INT_ENB, + usba_readl(udc, INT_ENB) | USBA_WAKE_UP); udc->bias_pulse_needed = true; DBG(DBG_BUS, "Suspend detected\n"); if (udc->gadget.speed != USB_SPEED_UNKNOWN
@@ -1631,6 +1633,8 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (status & USBA_WAKE_UP) { toggle_bias(udc, 1); usba_writel(udc, INT_CLR, USBA_WAKE_UP); + usba_writel(udc, INT_ENB, + usba_readl(udc, INT_ENB) & ~USBA_WAKE_UP); DBG(DBG_BUS, "Wake Up CPU detected\n"); }
--
1.9.1