[PATCH 4/5] cpufreq: imx6q: add ldo-bypass support

On Fri, Dec 19, 2014 at 8:23 AM, Mark Brown [off-list ref] wrote:

On Fri, Dec 19, 2014 at 08:17:41AM -0800, Tim Harvey wrote:

quoted

frequency setpoint. If however you have an external PMIC that is
capable of adjusting the VDD_ARM and VDD_SOC to the IMX6 and an
appropriate regulator driver is capable of doing so, you must
configure the cpu nodes vddarm and vddsoc regulators to those provided
by your PMIC and 'bypass' the internal LDO's by setting their scaling

You're describing the implementation again, not the system.  Describe
the system then if you want to describe the solution you've come up with
for modelling it do so separately.

Please also try to use paragraphs to break up what you're saying a bit.

Mark,

I'm not sure I'm understanding what your asking for or how to describe
it differently. Fabio / Shawn / Philipp could you help me out here
with the proper explanation of the IMX6 LDO's so that we can make some
progress on getting LDO bypass implemented?

Regards,

Tim