[PATCH] ti-soc-thermal: implement eocz bit to make driver useful on omap3
From: edubezval@gmail.com (Eduardo Valentin)
Date: 2015-01-03 12:26:46
Also in:
linux-omap, linux-pm, lkml
On Sat, Jan 03, 2015 at 12:46:32PM +0100, Pavel Machek wrote:
quoted hunk ↗ jump to hunk
For omap3, proper implementation of eocz bit is needed. It was actually a TODO in the driver. When periodic mode is not enabled, it is neccessary to force reads. Signed-off-by: Pavel Machek <redacted>diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 634b6ce..ee63d08 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c@@ -43,6 +43,8 @@ #include "ti-bandgap.h" +static int ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id); + /*** Helper functions to access registers and their bitfields ***/ /**@@ -852,14 +831,20 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id, if (ret) return ret; + if (!TI_BANDGAP_HAS(bgp, MODE_CONFIG)) { + ret = ti_bandgap_force_single_read(bgp, id);
not sure MODE_CONFIG is sufficient condition for single read on all OMAP versions.
+ if (ret) + return ret; + } + spin_lock(&bgp->lock); temp = ti_bandgap_read_temp(bgp, id); spin_unlock(&bgp->lock); - ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp); + ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
this one should be part of your clean up patch
quoted hunk ↗ jump to hunk
if (ret) return -EIO; *temperature = temp; return 0;@@ -917,7 +903,8 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id) static int ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id) { - u32 temp = 0, counter = 1000; + u32 counter = 1000; + struct temp_sensor_registers *tsr; /* Select single conversion mode */ if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))@@ -925,16 +912,27 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id) /* Start of Conversion = 1 */ RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1); - /* Wait until DTEMP is updated */ - temp = ti_bandgap_read_temp(bgp, id); - while ((temp == 0) && --counter) - temp = ti_bandgap_read_temp(bgp, id); - /* REVISIT: Check correct condition for end of conversion */ + /* Wait for EOCZ going up */ + tsr = bgp->conf->sensors[id].registers; + + while (--counter) { + if (ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) & + tsr->bgap_eocz_mask) + break; + } /* Start of Conversion = 0 */ RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0); + /* Wait for EOCZ going down */ + counter = 1000; + while (--counter) { + if (!(ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) & + tsr->bgap_eocz_mask)) + break; + } + return 0; }-- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 473 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150103/75e2e738/attachment.sig>