[PATCH] ARM: dts: Add dts file for odroid XU3 board

Sjoerd Simons [off-list ref] writes:

On Wed, 2014-12-03 at 11:53 -0800, Kevin Hilman wrote:

quoted

Sjoerd Simons [off-list ref] writes:
Tried this on top of linux-next (next-20141125 and next20141203) and
boots fine on my odroid-xu3. 

Thanks for doing this, I've been meaning to get a DTS upstream for this
platform myself.  I also noticed that the imprecise aborts I've been
seeing when booting this board with the smdk5420 DTS are gone, so I
don't have to dig into those now either.  Thanks!  :)

For completeness, the problem with running the smdk5420 DTS on the XU3
is that the XU3 runs secure firmware while the SMD5420 doesn't.. Hence
the imprecise aborts you were seeing.

OK, that's what I suspected but didn't take the time to verify.  Thanks
for the update.

BTW, I'll have some DTS updates for the xu3 to enable the on-board
INA2xx current sensors for easy power measurements without external
instrumentation.  Will send a patch for those soon.

Kevin