[PATCH] media: i2c/adp1653: devicetree support for adp1653
From: Mauro Carvalho Chehab <hidden>
Date: 2014-12-23 17:23:53
Also in:
linux-devicetree, linux-media, linux-omap, lkml
Em Wed, 3 Dec 2014 22:46:41 +0100 Pavel Machek [off-list ref] escreveu:
We are moving to device tree support on OMAP3, but that currently breaks ADP1653 driver. This adds device tree support, plus required documentation. Signed-off-by: Pavel Machek <redacted>
Please be sure to check your patch with checkpatch. There are several
issues on it:
WARNING: DT compatible string "adi,adp1653" appears un-documented -- check ./Documentation/devicetree/bindings/
#78: FILE: arch/arm/boot/dts/omap3-n900.dts:572:
+ compatible = "adi,adp1653";
ERROR: trailing whitespace
#136: FILE: drivers/media/i2c/adp1653.c:332:
+^I^I^I$
ERROR: trailing whitespace
#159: FILE: drivers/media/i2c/adp1653.c:436:
+static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, $
WARNING: line over 80 characters
#159: FILE: drivers/media/i2c/adp1653.c:436:
+static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash,
ERROR: trailing statements should be on next line
#177: FILE: drivers/media/i2c/adp1653.c:454:
+ if (!child) return -EINVAL;
WARNING: line over 80 characters
#178: FILE: drivers/media/i2c/adp1653.c:455:
+ if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL;
ERROR: trailing statements should be on next line
#178: FILE: drivers/media/i2c/adp1653.c:455:
+ if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL;
WARNING: line over 80 characters
#180: FILE: drivers/media/i2c/adp1653.c:457:
+ if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL;
ERROR: trailing statements should be on next line
#180: FILE: drivers/media/i2c/adp1653.c:457:
+ if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL;
ERROR: trailing statements should be on next line
#182: FILE: drivers/media/i2c/adp1653.c:459:
+ if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL;
ERROR: trailing statements should be on next line
#186: FILE: drivers/media/i2c/adp1653.c:463:
+ if (!child) return -EINVAL;
ERROR: trailing statements should be on next line
#187: FILE: drivers/media/i2c/adp1653.c:464:
+ if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL;
ERROR: trailing whitespace
#197: FILE: drivers/media/i2c/adp1653.c:474:
+^I^Idev_err(&client->dev, "Error getting GPIO\n"); $
total: 9 errors, 4 warnings, 199 lines checked
NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or
scripts/cleanfile
quoted hunk ↗ jump to hunk
--- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt@@ -0,0 +1,38 @@ +* Analog Devices ADP1653 flash LED driver + +Required Properties: + + - compatible: Must contain one of the following + - "adi,adp1653" + + - reg: I2C slave address + + - gpios: References to the GPIO that controls the power for the chip. + +There are two led outputs available - flash and indicator. One led is +represented by one child node, nodes need to be named "flash" and "indicator". + +Required properties of the LED child node: +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt + +Required properties of the flash LED child node: + +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt +- flash-timeout-microsec : see Documentation/devicetree/bindings/leds/common.txt + +Example: + + adp1653: led-controller at 30 { + compatible = "adi,adp1653"; + reg = <0x30>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-microsec = <500000>; + flash-max-microamp = <320000>; + max-microamp = <50000>; + }; + indicator { + max-microamp = <17500>; + }; + };diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index cfddc3d..11d8afd 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts@@ -560,6 +567,22 @@ ti,usb-charger-detection = <&isp1704>; }; + + adp1653: led-controller at 30 { + compatible = "adi,adp1653"; + reg = <0x30>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-microsec = <500000>; + flash-max-microamp = <320000>; + max-microamp = <50000>; + }; + + indicator { + max-microamp = <17500>; + }; + }; }; &i2c3 {diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c index 873fe19..62601b2 100644 --- a/drivers/media/i2c/adp1653.c +++ b/drivers/media/i2c/adp1653.c@@ -8,6 +8,7 @@ * Contributors: * Sakari Ailus <sakari.ailus@iki.fi> * Tuukka Toivonen <tuukkat76@gmail.com> + * Pavel Machek <pavel@ucw.cz> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License@@ -34,9 +35,11 @@ #include <linux/module.h> #include <linux/i2c.h> #include <linux/slab.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> #include <media/adp1653.h> #include <media/v4l2-device.h> #define TIMEOUT_MAX 820000 #define TIMEOUT_STEP 54600 #define TIMEOUT_MIN (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \@@ -306,9 +318,18 @@ adp1653_init_device(struct adp1653_flash *flash) static int __adp1653_set_power(struct adp1653_flash *flash, int on) { - int ret; + int ret = 0; - ret = flash->platform_data->power(&flash->subdev, on); + if (flash->platform_data->power) + ret = flash->platform_data->power(&flash->subdev, on); + else { + gpio_set_value(flash->platform_data->power_gpio, on); + if (on) { + /* Some delay is apparently required. */ + udelay(20); + } + } + if (ret < 0) return ret;@@ -316,8 +337,13 @@ __adp1653_set_power(struct adp1653_flash *flash, int on) return 0; ret = adp1653_init_device(flash); - if (ret < 0) + if (ret >= 0) + return ret; + + if (flash->platform_data->power) flash->platform_data->power(&flash->subdev, 0); + else + gpio_set_value(flash->platform_data->power_gpio, 0); return ret; }@@ -407,21 +433,69 @@ static int adp1653_resume(struct device *dev) #endif /* CONFIG_PM */ +static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, + struct device_node *node) +{ + u32 val; + struct adp1653_platform_data *pd; + enum of_gpio_flags flags; + int gpio; + struct device_node *child; + + if (!node) + return -EINVAL; + + pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + flash->platform_data = pd; + + child = of_get_child_by_name(node, "flash"); + if (!child) return -EINVAL;
One statement per line, please. Same for other lines below.
quoted hunk ↗ jump to hunk
+ if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL; + pd->max_flash_timeout = val; + if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL; + pd->max_flash_intensity = val/1000; + if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL; + pd->max_torch_intensity = val/1000; + + child = of_get_child_by_name(node, "indicator"); + if (!child) return -EINVAL; + if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL; + pd->max_indicator_intensity = val; + + if (!of_find_property(node, "gpios", NULL)) { + dev_err(&client->dev, "No gpio node\n"); + return -EINVAL; + } + + gpio = of_get_gpio_flags(node, 0, &flags); + if (gpio < 0) { + dev_err(&client->dev, "Error getting GPIO\n"); + return -EINVAL; + } + + pd->power_gpio = gpio; + return 0; +} + + static int adp1653_probe(struct i2c_client *client, const struct i2c_device_id *devid) { struct adp1653_flash *flash; int ret; - /* we couldn't work without platform data */ - if (client->dev.platform_data == NULL) - return -ENODEV; - flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); if (flash == NULL) return -ENOMEM; flash->platform_data = client->dev.platform_data; + if (!flash->platform_data) { + ret = adp1653_of_init(client, flash, client->dev.of_node); + if (ret) + return ret; + } mutex_init(&flash->power_lock);diff --git a/include/media/adp1653.h b/include/media/adp1653.h index 1d9b48a..b556580 100644 --- a/include/media/adp1653.h +++ b/include/media/adp1653.h@@ -100,9 +100,11 @@ struct adp1653_platform_data { int (*power)(struct v4l2_subdev *sd, int on); u32 max_flash_timeout; /* flash light timeout in us */ - u32 max_flash_intensity; /* led intensity, flash mode */ - u32 max_torch_intensity; /* led intensity, torch mode */ - u32 max_indicator_intensity; /* indicator led intensity */ + u32 max_flash_intensity; /* led intensity, flash mode, mA */ + u32 max_torch_intensity; /* led intensity, torch mode, mA */ + u32 max_indicator_intensity; /* indicator led intensity, uA */ + + int power_gpio; /* for device-tree based boot */ }; #define to_adp1653_flash(sd) container_of(sd, struct adp1653_flash, subdev)
-- Cheers, Mauro