On Wed, 26 Nov 2014, Kevin Hilman wrote:

Abhilash Kesavan [off-list ref] writes:

quoted

Hi Kevin,

On Wed, Nov 26, 2014 at 6:30 AM, Kevin Hilman [off-list ref] wrote:

quoted

[...]

More specifically, with only the loopback call to turn off CCI commented
out, the imprecise aborts go away.

I can't see how enabling snoops for the boot cluster is causing these
aborts. Perhaps as Krzysztof commented it has something to do with the
secure firmware/tz software on these boards ? Other than there does
not appear to be any difference between the working/non-working
setups.

Perhaps the secure firmware is preventing the CCI to be enabled by the
kernel, and that is causing the imprecise abort?

That is well possible.

Now...... if the bootloader/firmware does not let Linux deal with both 
the CCI and caches then MCPM simply has no more purpose for this board.  
The whole point of MCPM is actually to handle the CCI properly and the 
most efficient way despite all the possible races and opportunities for 
memory corruptions. And yes, this is a complex task.

So there is actually two choices: the firmware let Linux take care of it 
via the MCPM layer (easy), or the firmware has to implement it all 
_properly_ (hard) behind an interface such as PSCI, at which point MCPM 
should be configured out.

If the firmware does not let Linux interact with the CCI _and_ does not 
implement full MCPM-like services then the platform is broken and only a 
firmware upgrade could fix that.  It might still be possible to boot all 
CPUs through other means, but power management would then be severely 
limited.


Nicolas