Hi Geoff,

On Thu, Nov 13, 2014 at 3:24 AM, Geoff Levand [off-list ref] wrote:

Hi Arun, Dave,

On Fri, 2014-11-07 at 16:31 +0530, Arun Chandran wrote:

quoted

I have issue in flushing with L3 cache on . kexec does not reboot with L3.
Is the above logic of flushing (clean + invalidate) after copying the
image data is correct? Is there exist the danger of image data being
overwritten by invalid cache lines?

I tried with only invalidate(dc ivac); but that also not seems to be
working.

Finally I moved the entire flushing logic before copying then
things started working. Please see the code change below.

I added this with some minor changes.  Please let me know if
it works for you.

I tested master branch for both LE and BE booting with the
script below.

genericarmv8# cat /etc/rc5.d/S60reboot.sh
--------------------------------------
#!/bin/sh

i=$RANDOM

j=$(( $i % 2))

count=`cat /home/root/cnt`

if [ $j -eq 0 ] ; then
echo "KEXEC rebootng to LE"
/usr/local/sbin/kexec --lite -l /home/root/vmlinux_LE
--command-line="root=/dev/nfs rw
nfsroot=10.162.103.145:/nfs_root/linaro-image-lamp-genericarmv8,nfsvers=3
ip=:::::eth0:dhcp panic=1 console=ttyS0,115200
earlycon=uart8250,mmio32,0x1c020000"
echo $RANDOM > /home/root/"$count""_LE"
else
echo "KEXEC rebootng to BE"
/usr/local/sbin/kexec --lite -l /home/root/vmlinux_BE
--command-line="root=/dev/nfs rw
nfsroot=10.162.103.145:/nfs_root/linaro-image-lamp-genericarmv8b,nfsvers=3
ip=:::::eth0:dhcp panic=1 console=ttyS0,115200
earlycon=uart8250,mmio32,0x1c020000"
echo $RANDOM > /home/root/"$count""_BE"
fi
count=$(( $count + 1 ))
echo "$count">/home/root/cnt

/usr/local/sbin/kexec --lite -e
---------------------------------

It rebooted without any issues for more than 1 hour.

--Arun