[Regression Resend] mmc: mx28: sd card detection broken since 3.18-rc1

On 03/11/14 22:49, Michael Heimpold wrote:

Hi,

Hi Michael,

Am Montag, 3. November 2014, 01:01:07 schrieben Sie:

quoted

On 01/11/14 23:40, Stefan Wahren wrote:

quoted

Hi,

i was testing Linux Kernel 3.18-rc2 with my i.MX28 board (I2SE Duckbill) and ran
into the problem that the sd card isn't detected from the Kernel at booting
(driver: mxs-mmc.c). That results in a endless wait for the root partition

I ran into this issue as well. Seems that a card-detect flag 
(MMC_CAP2_CD_ACTIVE_HIGH) can currently be set based on an 
uninitialized variable, which can lead to the card being reported as 
not present. This patch fixes it for me:

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 03c53b72a2d6..f0e187682d3b 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c

@@ -311,7 +311,7 @@ int mmc_of_parse(struct mmc_host *host)
 	struct device_node *np;
 	u32 bus_width;
 	int len, ret;
-	bool cap_invert, gpio_invert;
+	bool cap_invert, gpio_invert = false;
 

sorry, but I don't understand how your patch fixes the problem.

First use of the gpio_invert bool is in line 370/371 within mmc_gpiod_request_cd
(re-wrapped into a single line here for better reading):

-snip-
ret = mmc_gpiod_request_cd(host, "cd", 0, true,  0, &gpio_invert);
-snap-

A pointer to the bool is passed, and inside mmc_gpiod_request_cd (drivers/mmc/core/slot-gpio.c,
line 322), always a value is assigned:

-snip-
if (gpio_invert)
                *gpio_invert = !gpiod_is_active_low(desc);
-snap-

So returning to mmc_of_parse, the bool should always have an initialized value.
Apart from some error handling, the bool is used immediately in the xor expression
and results in setting MMC_CAP2_CD_ACTIVE_HIGH bit, or not.

I also cannot see a code path, where gpio_invert is used without a call to mmc_gpiod_request_cd.

Would be nice, if you could point me to what I'm missing.

mmc_gpiod_request_cd can return without ever reaching the line where 
the value is assigned to gpio_invert:

desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN);
if (IS_ERR(desc))
	return PTR_ERR(desc);

This can happen when the host controller doesn't use a GPIO for card 
detection (but instead uses a dedicated pin). In this case 
devm_gpiod_get_index will return -ENOENT.

quoted

 	if (!host->parent || !host->parent->of_node)
 		return 0;

@@ -401,6 +401,7 @@ int mmc_of_parse(struct mmc_host *host)
 	else
 		cap_invert = false;
 
+	gpio_invert = false;
 	ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &gpio_invert);

Same here. The functions always assigns a value when a pointer is given.

Same thing, the function can return before gpio_invert is ever assigned 
to.

(And this change is unrelated to the reporters problem, so should be fixed with a
dedicated patch.)

Since both flags are set wrong for the exact same reason, and they're 
both regressions in 3.18, I thought it would make sense to fix them 
both in one patch. (Especially since I think it's cleaner to split the 
gpio_invert variable into cd_gpio_invert and ro_gpio_invert, and I was 
going to do that in the patch I'd send.) Let me know if you still think 
I should send separate patches for them.

Thanks for the review,
Kristina