[PATCH v10 08/10] arm: dts: qcom: Add idle states device nodes for 8074
From: Lina Iyer <hidden>
Date: 2014-11-21 18:03:55
Also in:
linux-arm-msm, linux-devicetree, linux-pm
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add ARM common idle states device bindings for cpuidle support for APQ 8074/8974. Support Standby and Standalone power collapse (power down that does not affect any SoC idle states) for each cpu. Signed-off-by: Lina Iyer <redacted> --- arch/arm/boot/dts/qcom-msm8974.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 80a4467..e68b40f 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi@@ -22,6 +22,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; cpu at 1 {
@@ -32,6 +33,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; cpu at 2 {
@@ -42,6 +44,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; cpu at 3 {
@@ -52,6 +55,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; L2: l2-cache {
@@ -59,6 +63,22 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_STBY: standby { + compatible = "qcom,idle-state-stby", "arm,idle-state"; + entry-latency-us = <1>; + exit-latency-us = <1>; + min-residency-us = <2>; + }; + + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; }; cpu-pmu {
--
2.1.0