[PATCHv2 6/8] arm: mvebu: add common ge0/1 and spi0 pintcrl entries for Armada XP MV78230
From: Arnaud Ebalard <hidden>
Date: 2014-11-16 17:37:44
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
pinctrl entries for the two GbE interfaces using RGMII signaling w/ the PHY via MPP0-11/MPP12-23 and the spi0 interface using MPP36-39 are common configurations. Instead of replicating them in each .dts file, put those in armada-xp-mv78230.dtsi file so that they can be referenced. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnaud Ebalard <redacted> --- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 2592e1c13560..85a39aed00dd 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi@@ -171,6 +171,26 @@ compatible = "marvell,mv78230-pinctrl"; reg = <0x18000 0x38>; + ge0_rgmii_pins: ge0-rgmii-pins { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + + ge1_rgmii_pins: ge1-rgmii-pins { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge1"; + }; + + spi0_pins: spi0-pins { + marvell,pins = "mpp36", "mpp37", + "mpp38", "mpp39"; + marvell,function = "spi"; + }; + sdio_pins: sdio-pins { marvell,pins = "mpp30", "mpp31", "mpp32", "mpp33", "mpp34", "mpp35";
--
2.1.1