[PATCHv1 3/3] arm: mvebu: add .dts file for Synology DS414
From: Arnaud Ebalard <hidden>
Date: 2014-11-16 13:17:07
Also in:
linux-devicetree
Hi, Andrew Lunn [off-list ref] writes:
quoted
+ internal-regs { + + pinctrl { + pmx_ge0: pmx-ge0 { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge1"; + }; + + pmx_spi: pmx-spi { + marvell,pins = "mpp36", "mpp37", + "mpp38", "mpp39"; + marvell,function = "spi"; + };It would be good to move these to armada-xp-mv78230.dtsi. I would suggest following the naming convention used by the 370.
Will do.
quoted
+ spi0: spi at 10600 { + status = "okay"; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; + + spi-flash at 0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q064"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + + /* + * Warning! + * + * Synology u-boot uses its compiled-in environment + * and it seems Synology did not care to change u-boot + * default configuration in order to allow saving a + * modified environment at a sensible location. So, + * if you do a 'saveenv' under u-boot, your modified + * environment be saved will at 1MB after the start + * of the flash, i.e. in the middle of the uImage. + * For that reason, it is strongly advised not to + * change default environment, unless you know what + * you are doing. + */Seems to be a cut/paste of the 370 text. So same comments.
Will correct typos.
quoted
+ i2c at 11000 { + clock-frequency = <400000>; + status = "okay"; + + s35390a: s35390a at 30 { + compatible = "ssi,s35390a";sii Ah! It is also wrong in kirkwood-synology.dtsi
Good catch anyway ;-) Cheers, a+