changes from v2:
- rename amplifier-opa362.c to encoder-opa362
- drop inversion handlign from driver
- add ti,invert-polarity to venc node
I also drop devconf1 handling patches because discussion how to
properly implement is not yet finished and this part is independent
from video driver.
changes from v1:
- fix opa362 compilation error
- fix opa362 DT documentation
- move devconf1 definition to omap3.dtsi
Marek Belisko (3):
video: omapdss: Add opa362 driver
Documentation: DT: Add documentation for ti,opa362 bindings
arm: dts: omap3-gta04: Add handling for tv output
.../devicetree/bindings/video/ti,opa362.txt | 38 +++
arch/arm/boot/dts/omap3-gta04.dtsi | 49 ++++
drivers/video/fbdev/omap2/displays-new/Kconfig | 6 +
drivers/video/fbdev/omap2/displays-new/Makefile | 1 +
.../fbdev/omap2/displays-new/encoder-opa362.c | 283 +++++++++++++++++++++
5 files changed, 377 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/ti,opa362.txt
create mode 100644 drivers/video/fbdev/omap2/displays-new/encoder-opa362.c
--
1.9.1