[PATCH v3] can: Convert to runtime_pm

Instead of enabling/disabling clocks at several locations in the driver,
use the runtime_pm framework. This consolidates the actions for
runtime PM in the appropriate callbacks and makes the driver more
readable and mantainable.

Signed-off-by: Soren Brinkmann <redacted>
Signed-off-by: Kedareswara rao Appana <redacted>
---
Changes for v3:
  - Converted the driver to use runtime_pm.
Changes for v2:
  - Removed the struct platform_device* from suspend/resume
    as suggest by Lothar.

 drivers/net/can/xilinx_can.c |  119 +++++++++++++++++++++++++----------------
 1 files changed, 72 insertions(+), 47 deletions(-)

diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 8a998e3..1be28ed 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c

@@ -32,6 +32,7 @@
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 #include <linux/can/led.h>
+#include <linux/pm_runtime.h>
 
 #define DRIVER_NAME	"xilinx_can"
 

@@ -138,7 +139,7 @@ struct xcan_priv {
 	u32 (*read_reg)(const struct xcan_priv *priv, enum xcan_reg reg);
 	void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg,
 			u32 val);
-	struct net_device *dev;
+	struct device *dev;
 	void __iomem *reg_base;
 	unsigned long irq_flags;
 	struct clk *bus_clk;

@@ -842,6 +843,13 @@ static int xcan_open(struct net_device *ndev)
 	struct xcan_priv *priv = netdev_priv(ndev);
 	int ret;
 
+	ret = pm_runtime_get_sync(priv->dev);
+	if (ret < 0) {
+		netdev_err(ndev, "%s: runtime CAN resume failed(%d)\n\r",
+				__func__, ret);
+		return ret;
+	}
+
 	ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
 			ndev->name, ndev);
 	if (ret < 0) {

@@ -849,29 +857,17 @@ static int xcan_open(struct net_device *ndev)
 		goto err;
 	}
 
-	ret = clk_prepare_enable(priv->can_clk);
-	if (ret) {
-		netdev_err(ndev, "unable to enable device clock\n");
-		goto err_irq;
-	}
-
-	ret = clk_prepare_enable(priv->bus_clk);
-	if (ret) {
-		netdev_err(ndev, "unable to enable bus clock\n");
-		goto err_can_clk;
-	}
-
 	/* Set chip into reset mode */
 	ret = set_reset_mode(ndev);
 	if (ret < 0) {
 		netdev_err(ndev, "mode resetting failed!\n");
-		goto err_bus_clk;
+		goto err_irq;
 	}
 
 	/* Common open */
 	ret = open_candev(ndev);
 	if (ret)
-		goto err_bus_clk;
+		goto err_irq;
 
 	ret = xcan_chip_start(ndev);
 	if (ret < 0) {

@@ -887,13 +883,11 @@ static int xcan_open(struct net_device *ndev)
 
 err_candev:
 	close_candev(ndev);
-err_bus_clk:
-	clk_disable_unprepare(priv->bus_clk);
-err_can_clk:
-	clk_disable_unprepare(priv->can_clk);
 err_irq:
 	free_irq(ndev->irq, ndev);
 err:
+	pm_runtime_put(priv->dev);
+
 	return ret;
 }
 

@@ -910,12 +904,11 @@ static int xcan_close(struct net_device *ndev)
 	netif_stop_queue(ndev);
 	napi_disable(&priv->napi);
 	xcan_chip_stop(ndev);
-	clk_disable_unprepare(priv->bus_clk);
-	clk_disable_unprepare(priv->can_clk);
 	free_irq(ndev->irq, ndev);
 	close_candev(ndev);
 
 	can_led_event(ndev, CAN_LED_EVENT_STOP);
+	pm_runtime_put(priv->dev);
 
 	return 0;
 }

@@ -934,27 +927,21 @@ static int xcan_get_berr_counter(const struct net_device *ndev,
 	struct xcan_priv *priv = netdev_priv(ndev);
 	int ret;
 
-	ret = clk_prepare_enable(priv->can_clk);
-	if (ret)
-		goto err;
+	ret = pm_runtime_get_sync(priv->dev);
+	if (ret < 0) {
+		netdev_err(ndev, "%s: runtime resume failed(%d)\n\r",
+				__func__, ret);
+		return ret;
+	}
 
-	ret = clk_prepare_enable(priv->bus_clk);
-	if (ret)
-		goto err_clk;
 
 	bec->txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) & XCAN_ECR_TEC_MASK;
 	bec->rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) &
 			XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT);
 
-	clk_disable_unprepare(priv->bus_clk);
-	clk_disable_unprepare(priv->can_clk);
+	pm_runtime_put(priv->dev);
 
 	return 0;
-
-err_clk:
-	clk_disable_unprepare(priv->can_clk);
-err:
-	return ret;
 }
 
 

@@ -967,15 +954,45 @@ static const struct net_device_ops xcan_netdev_ops = {
 
 /**
  * xcan_suspend - Suspend method for the driver
- * @dev:	Address of the platform_device structure
+ * @dev:	Address of the net_device structure

+ *
+ * Put the driver into low power mode.
+ * Return: 0 always
+ */
+static int __maybe_unused xcan_runtime_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
 	struct xcan_priv *priv = netdev_priv(ndev);
 
 	if (netif_running(ndev)) {

@@ -993,16 +1010,15 @@ static int __maybe_unused xcan_suspend(struct device *dev)
 }
 
 /**
- * xcan_resume - Resume from suspend
- * @dev:	Address of the platformdevice structure
+ * xcan_runtime_resume - Runtime resume from suspend
+ * @dev:	Address of the net_device structure