[PATCH] tty: serial: msm_serial: Use DT aliases
From: Frank Rowand <hidden>
Date: 2014-11-07 06:42:52
Also in:
linux-arm-msm, linux-serial, lkml
On 11/6/2014 10:40 PM, Frank Rowand wrote:
quoted hunk ↗ jump to hunk
From: Frank Rowand <redacted> Update msm8974 dtsi for msm_serial to reflect msm_serial_probe() getting line id from the serial alias. Signed-off-by: Frank Rowand <redacted> --- arch/arm/boot/dts/qcom-msm8974.dtsi | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) Index: b/arch/arm/boot/dts/qcom-msm8974.dtsi ===================================================================--- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi@@ -9,6 +9,10 @@ compatible = "qcom,msm8974"; interrupt-parent = <&intc>; + aliases { + serial0 = &serial0; + }; + cpus { #address-cells = <1>; #size-cells = <0>;@@ -189,7 +193,7 @@ reg = <0xfd8c0000 0x6000>; }; - serial at f991e000 { + serial0: serial at f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; interrupts = <0 108 0x0>;
This same change is also needed in: qcom-ipq8064.dtsi qcom-msm8960.dtsi qcom-apq8084.dtsi qcom-apq8064.dtsi qcom-msm8660.dtsi but I did not want to just blindly apply those changes without testing. -Frank