[PATCH v4 02/58] serial: at91: Use dmaengine_slave_config API
From: Nicolas Ferre <hidden>
Date: 2014-11-03 11:12:52
Also in:
lkml
On 28/10/2014 22:25, Maxime Ripard :
We are removing the dmaengine_device_control API, that shouldn't even have been exposed in the first place. Change the callers to use the proper API. Signed-off-by: Maxime Ripard <redacted>
Acked-by: Nicolas Ferre <redacted> Thanks, Maxime. Do I have to carry the patch myself or is it part of a series? Bye,
quoted hunk ↗ jump to hunk
--- drivers/tty/serial/atmel_serial.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index edde3eca055d..10e6b382d68f 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c@@ -862,9 +862,8 @@ static int atmel_prepare_tx_dma(struct uart_port *port) config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.dst_addr = port->mapbase + ATMEL_US_THR; - ret = dmaengine_device_control(atmel_port->chan_tx, - DMA_SLAVE_CONFIG, - (unsigned long)&config); + ret = dmaengine_slave_config(atmel_port->chan_tx, + &config); if (ret) { dev_err(port->dev, "DMA tx slave configuration failed\n"); goto chan_err;@@ -1026,9 +1025,8 @@ static int atmel_prepare_rx_dma(struct uart_port *port) config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.src_addr = port->mapbase + ATMEL_US_RHR; - ret = dmaengine_device_control(atmel_port->chan_rx, - DMA_SLAVE_CONFIG, - (unsigned long)&config); + ret = dmaengine_slave_config(atmel_port->chan_rx, + &config); if (ret) { dev_err(port->dev, "DMA rx slave configuration failed\n"); goto chan_err;
-- Nicolas Ferre