Am 21.10.2014 um 09:20 schrieb Thomas Gleixner:

On Tue, 21 Oct 2014, Oleksij Rempel wrote:

quoted

+	config DEBUG_ASM9260_UART
+		bool "Kernel low-level debugging via asm9260 UART"
+		depends on MACH_ASM9260
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to an UART or USART port on asm9260 based
+		  machines.
+
+		    DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+		    0x80000000      | 0xf0000000     | UART0
+		    0x80004000      | 0xf0004000     | UART1
+		    0x80008000      | 0xf0008000     | UART2
+		    0x8000c000      | 0xf000c000     | UART3
+		    0x80010000      | 0xf0010000     | UART4
+		    0x80014000      | 0xf0014000     | UART5
+		    0x80018000      | 0xf0018000     | UART6
+		    0x8001c000      | 0xf001c000     | UART7
+		    0x80020000      | 0xf0020000     | UART8
+		    0x80024000      | 0xf0024000     | UART9

What's the point of having this list in Kconfig?

1. no public documentation
2. How match is it different to this:

        config DEBUG_MSM_UART
                bool "Kernel low-level debugging messages via MSM UART"
                depends on ARCH_MSM
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the serial port on MSM devices.

                  ARCH                DEBUG_UART_PHYS   DEBUG_UART_BASE   #
                  MSM7X00A, QSD8X50   0xa9a00000        0xe1000000
  UART1
                  MSM7X00A, QSD8X50   0xa9b00000        0xe1000000
  UART2
                  MSM7X00A, QSD8X50   0xa9c00000        0xe1000000
  UART3

                  MSM7X30             0xaca00000        0xe1000000
  UART1
                  MSM7X30             0xacb00000        0xe1000000
  UART2
                  MSM7X30             0xacc00000        0xe1000000
  UART3

                  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE
configuration
                  options based on your needs.

        config DEBUG_QCOM_UARTDM
                bool "Kernel low-level debugging messages via QCOM UARTDM"
                depends on ARCH_QCOM
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the serial port on Qualcomm devices.

                  ARCH      DEBUG_UART_PHYS   DEBUG_UART_BASE
                  APQ8084   0xf995e000        0xfa75e000
                  MSM8X60   0x19c40000        0xf0040000
                  MSM8960   0x16440000        0xf0040000
                  MSM8974   0xf991e000        0xfa71e000

                  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE
configuration
                  options based on your needs.


-- 
Regards,
Oleksij

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 213 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141021/1132641d/attachment.sig>