[PATCH] bcm2835: add VideoCore Mailbox to the device tree

On Sat, 25 Oct 2014, Stephen Warren wrote:

On 10/24/2014 09:53 AM, Lee Jones wrote:

quoted

On Fri, 24 Oct 2014, Lubomir Rintel wrote:

quoted

Follows the generic Mailbox Controller bindings as documented in
Documentation/devicetree/bindings/mailbox/mailbox.txt.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: Stephen Warren <redacted>
Cc: Lee Jones <redacted>
Cc: devicetree at vger.kernel.org
Cc: linux-rpi-kernel at lists.infradead.org
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/bcm2835.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 3342cb1..bd046a9 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi

@@ -50,6 +50,13 @@
 			#interrupt-cells = <2>;
 		};
 
+		mailbox: mailbox at 0x7e00b880 {

Remove the 0x.

quoted

+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;

2 interrupts one cell right?  No flags?

The DT binding says 1 IRQ in the list, and the interrupt controller in
bcm2835.dtsi has 2 cells per IRQ.

Whether that's all the IRQs the HW has for this HW module, I don't know.

Okay, so guessing <BANK INT> then.  Very well, thanks for answering.