[PATCHv0 2/2] arm: mvebu: clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file
From: andrew@lunn.ch (Andrew Lunn)
Date: 2014-10-24 21:22:07
Also in:
linux-devicetree
On Fri, Oct 24, 2014 at 11:22:16PM +0200, Arnaud Ebalard wrote:
On NETGEAR ReadyNAS 102, the two disks are connected to the external Marvell 88SE9170 SATA Controller connected to the PCIe bus. The rear eSATA port is connected to the native Armada 370 SATA controller. This patch updates the comments in .dts file wrt SATA interfaces and reduces the number of ports for native Armada 370 interface from 1 to 2.
Typ0. Jason, can you swap the 1 and 2 around when you commit? Save having a v2. Otherwise Acked-by: Andrew Lunn <andrew@lunn.ch> Andrew
quoted hunk
Signed-off-by: Arnaud Ebalard <redacted> --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index f79579bdf8fe..1e38628f4060 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts@@ -35,7 +35,7 @@ pcie-controller { status = "okay"; - /* Connected to Marvell SATA controller */ + /* Connected to Marvell 88SE9170 SATA controller */ pcie at 1,0 { /* Port 0, Lane 0 */ status = "okay";@@ -53,8 +53,9 @@ status = "okay"; }; + /* eSATA interface */ sata at a0000 { - nr-ports = <2>; + nr-ports = <1>; status = "okay"; };-- 2.1.1