[PATCH v14 5/5] ARM: dts: enable Thermal on rk3288-evb board
From: dmitry.torokhov@gmail.com (Dmitry Torokhov)
Date: 2014-10-28 00:26:45
Also in:
linux-devicetree, linux-pm, lkml
On Mon, Oct 27, 2014 at 10:39:48AM +0800, Caesar Wang wrote:
when a thermal temperature over TSHUT.Default to via CRU reset the entire chip on rk3288-evb Board, TSHUT is low active on rk3288-evb board. Signed-off-by: Caesar Wang <redacted>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/rk3288-evb.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index cb83cea..fb70523 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi@@ -148,6 +148,12 @@ status = "okay"; }; +&tsadc { + tsadc-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + tsadc-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + &pinctrl { backlight { bl_en: bl-en {-- 1.9.1
-- Dmitry