On Sunday 26 October 2014 22:55:48 Pavel Machek wrote:

quoted

quoted

I have root prepared on /dev/mmcblk0p6. I tried 3.17 with
rx51_defconfig, but no, it refuses to mount it.

VFS: Cannot open root device "mmcblk0p6" or ....: error
-19.

And then it proceeds to list mmcblk0p6 as one of available
options

:-(.

Ideas welcome.

Try to add rootdelay=30 or rootwait to kernel cmdline.

I had rootdelay=3. Will try rootwait... no change. This is
v3.17 with rx51_defconfig. CONFIG_MACH_NOKIA_RX51=y => device
tree will not be used AFAICT.

Now I'm back at 3.14 without device tree; same setup works
there. I tried disabling RX51 support in 3.14 (to make it
boot using device tree) but that did not work.
								Pavel

I remember that there was some problem with initializing mmc 
device. Sometimes something failed and reading from eMMC was not 
possible. Try to boot kernel from uboot. Maybe it can help.

-- 
Pali Roh?r
pali.rohar at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141026/10e23158/attachment.sig>