[PATCH v2 6/9] ARM: berlin: Add BG2 ethernet DT nodes
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
Date: 2014-10-22 18:29:27
Also in:
linux-devicetree, lkml, netdev
Subsystem:
the rest · Maintainer:
Linus Torvalds
Marvell BG2 has two fast ethernet controllers with internal PHY, add the corresponding nodes to SoC dtsi. Tested-by: Antoine T?nart <redacted> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Changelog: v1->v2: - move phy-connection-type to controller node instead of PHY node (Reported by Sergei Shtylyov) Cc: "David S. Miller" <davem@davemloft.net> Cc: "Antoine T?nart" <redacted> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Eric Miao <redacted> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: linux-arm-kernel at lists.infradead.org Cc: netdev at vger.kernel.org Cc: devicetree at vger.kernel.org Cc: linux-kernel at vger.kernel.org --- arch/arm/boot/dts/berlin2.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 9d7c810ebd0b..dc0227dfc691 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi@@ -79,11 +79,47 @@ clocks = <&chip CLKID_TWD>; }; + eth1: ethernet at b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xb90000 0x10000>; + clocks = <&chip CLKID_GETH1>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-connection-type = "mii"; + phy-handle = <ðphy1>; + status = "disabled"; + + ethphy1: ethernet-phy at 0 { + reg = <0>; + }; + }; + cpu-ctrl at dd0000 { compatible = "marvell,berlin-cpu-ctrl"; reg = <0xdd0000 0x10000>; }; + eth0: ethernet at e50000 { + compatible = "marvell,pxa168-eth"; + reg = <0xe50000 0x10000>; + clocks = <&chip CLKID_GETH0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-connection-type = "mii"; + phy-handle = <ðphy0>; + status = "disabled"; + + ethphy0: ethernet-phy at 0 { + reg = <0>; + }; + }; + apb at e80000 { compatible = "simple-bus"; #address-cells = <1>;
--
2.1.1