[PATCH v2 4/5] ARM: berlin: Add AHCI and SATA PHY nodes to BG2
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
Date: 2014-10-21 09:08:19
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add DT nodes for the AHCI controller and SATA PHY found on Marvell Berlin2 SoCs. Acked-by: Antoine T?nart <redacted> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Changelog: v1->v2: - remove status = "disabled" from SATA controller node (Suggested by Antoine) Cc: Kishon Vijay Abraham I <redacted> Cc: "Antoine T?nart" <redacted> Cc: devicetree at vger.kernel.org Cc: linux-arm-kernel at lists.infradead.org Cc: linux-kernel at vger.kernel.org --- arch/arm/boot/dts/berlin2.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 9d7c810ebd0b..f39090491eb2 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi@@ -246,6 +246,45 @@ }; }; + ahci: sata at e90000 { + compatible = "marvell,berlin2-ahci", "generic-ahci"; + reg = <0xe90000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port at 0 { + reg = <0>; + phys = <&sata_phy 0>; + status = "disabled"; + }; + + sata1: sata-port at 1 { + reg = <1>; + phys = <&sata_phy 1>; + status = "disabled"; + }; + }; + + sata_phy: phy at e900a0 { + compatible = "marvell,berlin2-sata-phy"; + reg = <0xe900a0 0x200>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + #phy-cells = <1>; + status = "disabled"; + + sata-phy at 0 { + reg = <0>; + }; + + sata-phy at 1 { + reg = <1>; + }; + }; + chip: chip-control at ea0000 { compatible = "marvell,berlin2-chip-ctrl"; #clock-cells = <1>;
--
2.1.1