The PXA168 Ethernet IP support MII and RMII connection to its PHY.
Currently, pxa168 platform_data does not provide a way to pass that
and there is one user of pxa168 platform_data (mach-mmp/gplug).
Given the pinctrl settings of gplug it uses RMII, so add and pass
a corresponding phy_interface_t.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Antoine T?nart" <redacted>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Eric Miao <redacted>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: netdev at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
---
 arch/arm/mach-mmp/gplugd.c | 2 ++
 include/linux/pxa168_eth.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index d81b2475e67e..3b5794cd0357 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c

@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/gpio-pxa.h>
+#include <linux/phy.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>

@@ -158,6 +159,7 @@ struct pxa168_eth_platform_data gplugd_eth_platform_data = {
 	.port_number = 0,
 	.phy_addr    = 0,
 	.speed       = 0, /* Autonagotiation */
+	.intf        = PHY_INTERFACE_MODE_RMII,
 	.init        = gplugd_eth_init,
 };
 

diff --git a/include/linux/pxa168_eth.h b/include/linux/pxa168_eth.h
index 18d75e795606..37c381120bc8 100644
--- a/include/linux/pxa168_eth.h
+++ b/include/linux/pxa168_eth.h

@@ -13,6 +13,7 @@ struct pxa168_eth_platform_data {
 	 */
 	int	speed;		/* 0, SPEED_10, SPEED_100 */
 	int	duplex;		/* DUPLEX_HALF or DUPLEX_FULL */
+	phy_interface_t intf;
 
 	/*
 	 * Override default RX/TX queue sizes if nonzero.

-- 
2.1.1