[PATCH v3 0/5] ARM: sunxi: Add basic support for Allwinner A80 SoC
From: afaerber@suse.de (Andreas Färber)
Date: 2014-10-09 02:54:55
Also in:
linux-devicetree, lkml
From: afaerber@suse.de (Andreas Färber)
Date: 2014-10-09 02:54:55
Also in:
linux-devicetree, lkml
Hi, Am 08.10.2014 um 15:02 schrieb Chen-Yu Tsai:
This is v3 of the initial Allwinner A80 support series. This patch series adds very basic support for Allwinner's A80 SoC, a big.LITTLE architecture with 4 Cortex-A7s and 4 Cortex-A15s. Development is done on the A80 Optimus Board, the defacto development board for the A80, with the accompanying SDK as a reference. So far I've been unable to get the board to boot from MMC, or using Android fastboot. I'm using Allwinner's FEL mode to load the bootloader and kernel+dtb image over USB. Notes on my attempts can be found here: http://linux-sunxi.org/User:Wens#A80_Optimus
Tested-by: Andreas F?rber <afaerber@suse.de> With this patch set on top of Maxime's sunxi-next branch, I get as far as searching for the rootfs. CPUs 1-7 fail to boot with -38, which I guess is due to the vendor U-Boot not yet supporting PSCI. Thanks a lot for your work and help, Chen-Yu! Regards, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: OpenPGP digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141009/6f193c65/attachment.sig>