[PATCH 07/44] qnap-poweroff: Drop reference to pm_power_off from devicetree bindings
From: linux@roeck-us.net (Guenter Roeck)
Date: 2014-10-07 05:48:58
Also in:
linux-acpi, linux-alpha, linux-devicetree, linux-efi, linux-mips, linux-pm, linux-s390, linux-sh, linux-tegra, linux-um, linuxppc-dev, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Replace reference to pm_power_off (which is an implementation detail) and replace it with a more generic description of the driver's functionality. Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <redacted> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index af25e77..1e2260a 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt@@ -3,8 +3,8 @@ QNAP NAS devices have a microcontroller controlling the main power supply. This microcontroller is connected to UART1 of the Kirkwood and Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the -microcontroller to turn the power off. This driver adds a handler to -pm_power_off which is called to turn the power off. +microcontroller to turn the power off. This driver installs a handler +to power off the system. Synology NAS devices use a similar scheme, but a different baud rate, 9600, and a different character, '1'.
--
1.9.1