[PATCH 2/5] clk: imx5: add step clock, used when reprogramming PLL1
From: l.stach@pengutronix.de (Lucas Stach)
Date: 2014-09-19 16:16:18
Also in:
linux-pm
Subsystem:
arm port, common clk framework, nxp i.mx clock drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Russell King, Michael Turquette, Stephen Boyd, Abel Vesa, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This is the bypass clock used to feed the ARM partition while we reprogram PLL1 to another clock. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> --- arch/arm/mach-imx/clk-imx51-imx53.c | 9 ++++++++- include/dt-bindings/clock/imx5-clock.h | 4 +++- 2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 72d65214223e..aafccf4b47c2 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c@@ -125,6 +125,8 @@ static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw", static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", }; static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", }; static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", }; +static const char *step_sels[] = { "lp_apm", }; +static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" }; static struct clk *clk[IMX5_CLK_END]; static struct clk_onecell_data clk_data;
@@ -193,7 +195,9 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base) clk[IMX5_CLK_USB_PHY_PODF] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3); clk[IMX5_CLK_USB_PHY_SEL] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1, usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str)); - clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3); + clk[IMX5_CLK_STEP_SEL] = imx_clk_mux("step_sel", MXC_CCM_CCSR, 7, 2, step_sels, ARRAY_SIZE(step_sels)); + clk[IMX5_CLK_CPU_PODF_SEL] = imx_clk_mux("cpu_podf_sel", MXC_CCM_CCSR, 2, 1, cpu_podf_sels, ARRAY_SIZE(cpu_podf_sels)); + clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "cpu_podf_sel", MXC_CCM_CACRR, 0, 3); clk[IMX5_CLK_DI_PRED] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3); clk[IMX5_CLK_IIM_GATE] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30); clk[IMX5_CLK_UART1_IPG_GATE] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
@@ -551,6 +555,9 @@ static void __init mx53_clocks_init(struct device_node *np) /* move can bus clk to 24MHz */ clk_set_parent(clk[IMX5_CLK_CAN_SEL], clk[IMX5_CLK_LP_APM]); + /* make sure step clock is running from 24MHz */ + clk_set_parent(clk[IMX5_CLK_STEP_SEL], clk[IMX5_CLK_LP_APM]); + clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]); imx_print_silicon_rev("i.MX53", mx53_revision()); clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
diff --git a/include/dt-bindings/clock/imx5-clock.h b/include/dt-bindings/clock/imx5-clock.h
index 5f2667ecd98e..1a36ff4ace1e 100644
--- a/include/dt-bindings/clock/imx5-clock.h
+++ b/include/dt-bindings/clock/imx5-clock.h@@ -198,6 +198,8 @@ #define IMX5_CLK_OCRAM 186 #define IMX5_CLK_SAHARA_IPG_GATE 187 #define IMX5_CLK_SATA_REF 188 -#define IMX5_CLK_END 189 +#define IMX5_CLK_STEP_SEL 189 +#define IMX5_CLK_CPU_PODF_SEL 190 +#define IMX5_CLK_END 191 #endif /* __DT_BINDINGS_CLOCK_IMX5_H */
--
2.1.0