[PATCH 12/12] ARM: omap2plus_defconfig: Enable some display features
From: tony@atomide.com (Tony Lindgren)
Date: 2014-09-16 03:12:06
Also in:
linux-omap
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/configs/omap2plus_defconfig | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 113f104..c029e5e 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig@@ -157,7 +157,9 @@ CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_MATRIX=m CONFIG_KEYBOARD_TWL4030=y CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_TSC2005=m +CONFIG_TOUCHSCREEN_TSC2007=m CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y # CONFIG_LEGACY_PTYS is not set
@@ -220,6 +222,7 @@ CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_OMAP2_DSS=m +CONFIG_OMAP5_DSS_HDMI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m
@@ -227,11 +230,25 @@ CONFIG_DISPLAY_ENCODER_TFP410=m CONFIG_DISPLAY_ENCODER_TPD12S015=m CONFIG_DISPLAY_CONNECTOR_DVI=m CONFIG_DISPLAY_CONNECTOR_HDMI=m +CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m CONFIG_DISPLAY_PANEL_DPI=m +CONFIG_DISPLAY_PANEL_DSI_CM=m +CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m +CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m +CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m +CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m +CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m +CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_PWM=m +CONFIG_BACKLIGHT_PANDORA=m +CONFIG_BACKLIGHT_GPIO=m CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y CONFIG_SOUND=m
@@ -283,6 +300,9 @@ CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y CONFIG_EXTCON=y CONFIG_EXTCON_PALMAS=y +CONFIG_PWM=y +CONFIG_PWM_TWL=y +CONFIG_PWM_TWL_LED=y CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y CONFIG_EXT2_FS=y
--
2.1.0