Thread (4 messages) 4 messages, 3 authors, 2014-09-04

[Patch net-next 08/11] net:fec: change FEC alignment to 64 bytes for ARM platform

flat view
STALE4427d

From: fugang.duan at freescale.com <hidden>
Date: 2014-09-04 09:11:10

From: David Laight <redacted> Sent: Thursday, September 04, 2014 4:51 PM
To: Li Frank-B20596; Duan Fugang-B38611; davem at davemloft.net;
netdev at vger.kernel.org; lznuaa at gmail.com
Cc: shawn.guo at linaro.org; linux-arm-kernel at lists.infradead.org;
devicetree at vger.kernel.org; Duan Fugang-B38611
Subject: RE: [Patch net-next 08/11] net:fec: change FEC alignment to 64
bytes for ARM platform

From: Frank Li
quoted
From: Fugang Duan <redacted>

Since enet-avb has 64 bytes alignment limitation for rx DMA transfer.
The previous enet IP for ARM platform has 16 bytes alignment for tx
DMA transfer.
Do you mean rx or tx here? or both??

And can we beat up the hardware designers to stop these restrictions on rx
(in particular) ethernet buffer alignments?
A device isn't suitable for ethernet unless is can write the destination
mac address to a 4n+2 boundary.

David
Hi, David,

For previous enet IP there has 16 bytes data buffer alignment limitation for tx & rx DMA transfer.
For imx6sx enet-avb IP, there has 64 bytes data buffer alignment limitation for rx DMA transfer, byte alignment for tx data
Buffer for DMA transfer.

I think rx data buffer alignment limitation don't introduce performance drop, is not complex for sw implemention. Anyway,
We can request IC designer to remove the limitation for future chips.

Thanks,
Andy
quoted
64 is the an integral number of 16, so change alignment to 64 bytes
for all ARM platform, which don't impact the performance of previous
platform.

Signed-off-by: Fugang Duan <redacted>
Signed-off-by: Frank Li <redacted>
---
 drivers/net/ethernet/freescale/fec_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c
b/drivers/net/ethernet/freescale/fec_main.c
index a232245..b388e29f 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -65,7 +65,7 @@
 static void set_multicast_list(struct net_device *ndev);

 #if defined(CONFIG_ARM)
-#define FEC_ALIGNMENT	0xf
+#define FEC_ALIGNMENT	0x3f
 #else
 #define FEC_ALIGNMENT	0x3
 #endif
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo at vger.kernel.org More majordomo info
at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help