[PATCH v7 6/7] arm: dts: qcom: Add idle states device nodes for 8974
From: Lina Iyer <hidden>
Date: 2014-09-27 00:58:43
Also in:
linux-arm-msm, linux-pm
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add allowable C-States for each cpu using the cpu-idle-states node. ARM spec dictates WFI as the default idle state at 0. Support standalone power collapse (power down that does not affect any SoC idle states) for each cpu. Signed-off-by: Lina Iyer <redacted> --- arch/arm/boot/dts/qcom-msm8974.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 828f5bb..cb710ce 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi@@ -22,6 +22,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_WFI &CPU_SPC>; }; cpu at 1 {
@@ -32,6 +33,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_WFI &CPU_SPC>; }; cpu at 2 {
@@ -42,6 +44,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_WFI &CPU_SPC>; }; cpu at 3 {
@@ -52,6 +55,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_WFI &CPU_SPC>; }; L2: l2-cache {
@@ -59,6 +63,22 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_WFI: wfi { + compatible = "qcom,idle-state-wfi", "arm,idle-state"; + entry-latency-us = <1>; + exit-latency-us = <1>; + min-residency-us = <2>; + }; + + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; }; cpu-pmu {
--
1.9.1