Define the R8A7790 generic part of the USB PHY device node. It is up to the
board file to enable the device.
Signed-off-by: Sergei Shtylyov <redacted>
---
Changes in version 4:
- refreshed the patch.
Changes in version 3:
- changed subnodes of the USB PHY node to be per-channel;
- changed "renesas,phy-select" property to "reg" in the subnodes, and thus added
"#address-cells" and "#size-cells" properties to the parent node;
- moved "#phy-cells" property from the parent node to the subnodes, changing its
value to <1>;
- refreshed the patch.
Changes in version 2:
- added subnodes to the USB PHY node;
- refreshed the patch.
arch/arm/boot/dts/r8a7790.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7790.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7790.dtsi
+++ renesas/arch/arm/boot/dts/r8a7790.dtsi
@@ -600,6 +600,25 @@
status = "disabled";
};
+ usbphy: usb-phy at e6590100 {
+ compatible = "renesas,usb-phy-r8a7790";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ clock-names = "usbhs";
+ status = "disabled";
+
+ usb0: usb-channel at 0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel at 2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;