LDO8 regulator is used for act led and serial cosole power supply.
Its DT status is declared as "disabled", however the serial console was
functional until Commit 318dbb02b ("regulator: palmas: Fix SMPS
enable/disable/is_enabled") wich properly turns off LDO8 on boot.
Fix serial cosole power supply (and act led) on boot by turning LDO8 on.
Signed-off-by: Dmitry Lifshitz <redacted>
---
arch/arm/boot/dts/omap5-cm-t54.dts | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index b8698ca..429471a 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -353,13 +353,12 @@
};
ldo8_reg: ldo8 {
- /* VDD_3v0: Does not go anywhere */
+ /* VDD_3V_GP: act led/serial console */
regulator-name = "ldo8";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
+ regulator-always-on;
regulator-boot-on;
- /* Unused */
- status = "disabled";
};
ldo9_reg: ldo9 {--
1.7.5.4