[PATCH v4 1/2] rc: Add DT bindings for hix5hd2

On 09/01/2014 11:49 AM, Varka Bhadram wrote:

On 08/31/2014 08:09 AM, Zhangfei Gao wrote:

quoted

From: Guoxiong Yan <redacted>

Signed-off-by: Guoxiong Yan <redacted>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
  .../devicetree/bindings/media/hix5hd2-ir.txt       |   25
++++++++++++++++++++
  1 file changed, 25 insertions(+)
  create mode 100644
Documentation/devicetree/bindings/media/hix5hd2-ir.txt

diff --git a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt

b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
new file mode 100644
index 0000000..fb5e760

--- /dev/null
+++ b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt

@@ -0,0 +1,25 @@
+Device-Tree bindings for hix5hd2 ir IP
+
+Required properties:
+    - compatible: Should contain "hisilicon,hix5hd2-ir".
+    - reg: Base physical address of the controller and length of memory
+      mapped region.
+    - interrupts: interrupt-specifier for the sole interrupt

generated by
+      the device. The interrupt specifier format depends on the
interrupt
+      controller parent.
+    - clocks: clock phandle and specifier pair.
+    - hisilicon,power-syscon: phandle of syscon used to control power.
+

No need of tab space before -compatible.... Give tab spaces after
properties...

ex:

Required properties:
- compatible        : Should contain "hisilicon,hix5hd2-ir".
- reg            : Base physical address of the controller and length of
memory
               mapped region.

...

Its not standard, but in my view it is understandable. Now every one
following this
one.

Really, I still prefer the original one.
Have checked several bindings under media, so add tab ahead
like st-rc.txt, gpio-ir-receiver.txt

Thanks