[PATCH 2/6] arm64: Add DTS support for Spreadtrum's Shark64 SoC
From: afaerber@suse.de (Andreas Färber)
Date: 2014-09-29 14:55:31
Also in:
linux-devicetree, lkml
Hi, Am 29.09.2014 um 13:48 schrieb zhang.lyra at gmail.com:
quoted hunk ↗ jump to hunk
From: "zhizhou.zhang" <redacted> Adds the device tree support for Spreadtrum Shark64 SoC based on ARMv8 architecture. Signed-off-by: zhizhou.zhang <redacted> Signed-off-by: chunyan.zhang <redacted> --- arch/arm64/boot/dts/sprd_shark64.dts | 110 ++++++++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 arch/arm64/boot/dts/sprd_shark64.dtsdiff --git a/arch/arm64/boot/dts/sprd_shark64.dts b/arch/arm64/boot/dts/sprd_shark64.dts new file mode 100644 index 0000000..537cd6d --- /dev/null +++ b/arch/arm64/boot/dts/sprd_shark64.dts@@ -0,0 +1,110 @@ +/* + * dts file for Spreadtrum(sprd) Shark64 SOC + * + * Copyright (C) 2014, Spreadtrum Communications Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/dts-v1/; + +/memreserve/ 0x80000000 0x00010000; + +/ { + model = "shark64 Board";
The commit message says SoC but here it says Board. Usually the SoC goes into a .dtsi file that can then be reused for multiple boards (.dts). Even if you only have one board for now, this distinction makes sense. You can use status = "disabled"; to prepare nodes in the .dtsi and then override the ones used via status = "okay"; in the .dts file. UARTs are a typical example where you will see this pattern used.
+ compatible = "sprd,shark64";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen {
+ bootargs = "earlycon=serial_sprd,0x70000000";
+ };Some spaces snuck into this line. ;) Cheers, Andreas
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x20000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ gic: interrupt-controller at 12001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x12001000 0 0x1000>,
+ <0 0x12002000 0 0x1000>;
+ };
+
+ intc:interrupt-controller at 71400000 {
+ compatible = "sprd,intc";
+ #interrupt-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x71400000 0 0x1000>,
+ <0 0x71500000 0 0x1000>,
+ <0 0x71600000 0 0x1000>,
+ <0 0x71700000 0 0x1000>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff01>,
+ <1 14 0xff01>,
+ <1 11 0xff01>,
+ <1 10 0xff01>;
+ clock-frequency = <26000000>;
+ };
+
+ uart0: uart at 70000000 {
+ compatible = "sprd,serial";
+ reg = <0 0x70000000 0 0x100>;
+ interrupts = <0 2 0xf04>;
+ };
+
+ uart1: uart at 70100000 {
+ compatible = "sprd,serial";
+ reg = <0 0x70100000 0 0x100>;
+ interrupts = <0 3 0xf04>;
+ };
+};-- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg