[PATCH v3 03/13] PM / Domains: Add DT bindings for PM QoS device latencies
From: geert+renesas@glider.be (Geert Uytterhoeven)
Date: 2014-09-25 16:33:00
Also in:
linux-devicetree, linux-pm, linux-sh, lkml
Subsystem:
generic pm domains, open firmware and flattened device tree bindings, the rest · Maintainers:
Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
PM QoS device start/stop and save/restore state latencies are more or less properties of the hardware. In legacy code, they're specified from platform code. On DT platforms, their values should come from DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Should these properties be called "linux,*-latency"? v3: - No changes v2: - New Documentation/devicetree/bindings/power/power_domain.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index 7bc421d84367d636..024815bc257723b1 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt@@ -42,12 +42,22 @@ Required properties: - power-domains : A phandle and PM domain specifier as defined by bindings of the power controller specified by phandle. +Optional properties: + - stop-latency: Stop latency of the device, in ns, + - start-latency: Start latency of the device, in ns, + - save-state-latency: Save-state latency of the device, in ns, + - restore-state-latency: Restore-state latency of the device, in ns. + Example: leaky-device at 12350000 { compatible = "foo,i-leak-current"; reg = <0x12350000 0x1000>; power-domains = <&power 0>; + stop-latency = <250000>; + start-latency = <250000>; + save-state-latency = <250000>; + restore-state-latency = <250000>; }; The node above defines a typical PM domain consumer device, which is located
--
1.9.1