[PATCH v7 06/10] rtc: at91sam9: rework the Kconfig description
From: Nicolas Ferre <hidden>
Date: 2014-09-23 10:08:53
Also in:
linux-devicetree, linux-rtc, lkml
On 23/09/2014 11:38, Boris BREZILLON :
quoted hunk ↗ jump to hunk
Remove all references to AT91CAP9 SoC which has been removed. Rework the help message to remove any specific references to AT91SAM9 SoCs. Signed-off-by: Boris BREZILLON <redacted> --- drivers/rtc/Kconfig | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 7d76da8..455f2c3 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig@@ -1079,17 +1079,18 @@ config RTC_DRV_AT91RM9200 this is powered by the backup power supply. config RTC_DRV_AT91SAM9 - tristate "AT91SAM9x/AT91CAP9 RTT as RTC" + tristate "AT91SAM9 RTT as RTC" depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40) select MFD_SYSCON help - RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT - (Real Time Timer). These timers are powered by the backup power - supply (such as a small coin cell battery), but do not need to - be used as RTCs. - - (On AT91SAM9rl and AT91SAM9G45 chips you probably want to use the - dedicated RTC module and leave the RTT available for other uses.) + Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which + can be used as an RTC thanks to the backup power supply (e.g. a + small coin cell battery) which keeps this block and the GPBR + (General Purpose Backup Registers) block powered when the device + is shutdown. + Some AT91SAM9 SoCs provide a real RTC block, on those ones you'd + probably want to use the real RTC block instead of the RTT as an + RTT driver.
You mean: "instead of the RTT as an RTC" With that, good description: thanks! Acked-by: Nicolas Ferre <redacted> So, now we can think of what to do with the series: - Johan, do you want to "Ack" it? - may I take it through the arm-soc git tree (likely for the 3.19 dev. phase). Your thoughts? Bye,
config RTC_DRV_AT91SAM9_RTT int
-- Nicolas Ferre