Thread (5 messages) 5 messages, 3 authors, 2014-09-17

[PATCH v3] ARM: apq8064: Add pinmux and i2c pinctrl nodes

From: kiran.padwal at smartplayin.com <hidden>
Date: 2014-09-16 12:36:45
Also in: linux-arm-msm, linux-devicetree, lkml


On Monday, September 15, 2014 10:39pm, "Andy Gross" [off-list ref] said:
On Tue, Aug 26, 2014 at 05:00:45PM +0530, Kiran Padwal wrote:
quoted
This patch adds pinmux and i2c pinctrl DT node for IFC6410 board.
It also adds necessary DT support for i2c eeprom which is present on
IFC6410.

Tested on IFC6410 board.
Looks fine
Thanks for review.
quoted
Signed-off-by: Kiran Padwal <redacted>
---
Changes since v2:
 - Renamed pinmux i2c subnode "i2c1_pinmux" to "i2c1".
 - Removed labes of node.
 - Used canonical value as "okay" instead of "ok".
 - Used macros.

Changes since v1:
 - Renamed pinmux phandle "qcom_pinmux" to "tlmm_pinmux".
 - Updated pinmux interrupt.

 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts |   27 ++++++++++++++
 arch/arm/boot/dts/qcom-apq8064.dtsi        |   53 ++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 7c2441d..ef0857e 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -5,6 +5,24 @@
 	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";

 	soc {
+		gsbi at 12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c at 12460000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+
+				eeprom: eeprom at 52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
don't need read only here.  the eeprom is not being used by anything....
thankfully.
quoted
+			};
+		};
+
 		gsbi at 16600000 {
 			status = "ok";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
@@ -12,5 +30,14 @@
 				status = "ok";
 			};
 		};
+
+		pinmux at 800000 {
+			i2c1_pins: i2c1 {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "gsbi1";
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi
b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 92bf793..5dddbf3 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -89,6 +89,17 @@
 			cpu-offset = <0x80000>;
 		};

+		tlmm_pinmux: pinmux at 800000 {
+			compatible = "qcom,apq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		acc0: clock-controller at 2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
@@ -133,6 +144,48 @@
 			regulator;
 		};

+		gsbi1: gsbi at 12440000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12440000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			i2c1: i2c at 12460000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x12460000 0x1000>;
+				interrupts = <0 194 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi2: gsbi at 12480000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			i2c2: i2c at 124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				interrupts = <0 196 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gsbi7: gsbi at 16600000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help