Note: Correcting the typo for linux-acpi mailing list in this reply.

Also, I would like to add the link to the "AMD Opteron? A1100 Series 
Processor ACPI Porting Guide", which describes the current ACPI table 
for AMD Seattle platform here:

http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/Seattle_ACPI_Guide.pdf

Suravee

On 09/15/2014 07:47 PM, suravee.suthikulpanit at amd.com wrote:

From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>

As a follow up of the email thread:

     [PATCH v3 00/17] Introduce ACPI for ARM64 based on ACPI 5.1
     https://lkml.org/lkml/2014/9/1/446

Besides Hanjun Guo's patches above, these are the additional patches required
to boot AMD Seattle platform with full ACPI support:

     [PATCH] efi/arm64: efistub: don't abort if base of DRAM is occupied
     http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/272274.html

     [PATCH v2] efi/arm64: fix fdt-related memory reservation
     https://lkml.org/lkml/2014/9/8/483

     [PATCH] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
     https://lkml.org/lkml/2014/9/9/834

     [RFC PATCH for Juno 2/2] tty: SBSA compatible UART
     https://lkml.org/lkml/2014/9/1/448
     (NOTE: This is not meant to be submitted upstream, but required to enable
      ACPI support for UART SBSA driver.)

These patches are rebased from the linux-3.17-rc4 upstream kernel, and
compatible with the AMD Seattle Firmware version ROD0070C.
The full kernel boot log can be found here:

     http://people.linaro.org/~al.stone/seattle-boot-acpi-dmesg.txt

Suravee / Al

Ard Biesheuvel (1):
   arm64/efi: efistub: don't abort if base of DRAM is occupied

Grame Gregory (1):
   [RFC PATCH for Juno 2/2] tty: SBSA compatible UART

Mark Salter (1):
   efi/arm64: fix fdt-related memory reservation

Suravee Suthikulpanit (1):
   ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller

  arch/arm64/kernel/efi-stub.c       |  16 +-
  arch/arm64/mm/init.c               |   3 +-
  drivers/ata/Kconfig                |   2 +-
  drivers/ata/ahci_platform.c        |  13 ++
  drivers/firmware/efi/libstub/fdt.c |  10 +-
  drivers/tty/Kconfig                |   6 +
  drivers/tty/Makefile               |   1 +
  drivers/tty/sbsauart.c             | 328 +++++++++++++++++++++++++++++++++++++
  8 files changed, 365 insertions(+), 14 deletions(-)
  create mode 100644 drivers/tty/sbsauart.c