Hi,

On Thu, Sep 11, 2014 at 09:10:21PM +0530, Kishon Vijay Abraham I wrote:

Hi,

On Wednesday 10 September 2014 01:26 PM, Vivek Gautam wrote:

quoted

On Wed, Sep 10, 2014 at 10:53 AM, Vivek Gautam [off-list ref] wrote:

quoted

On Wed, Sep 10, 2014 at 10:23 AM, Felipe Balbi [off-list ref] wrote:

quoted

On Wed, Sep 10, 2014 at 09:09:57AM +0530, Vivek Gautam wrote:

quoted

On Wed, Sep 10, 2014 at 9:07 AM, Vivek Gautam [off-list ref] wrote:

quoted

adding Julius here,

i think i had missed adding Julius for this entire series :-(
I should be more careful with the CC list in future.
Added his chromium id, since that seems to be more active.

quoted

On Tue, Sep 9, 2014 at 8:12 PM, Felipe Balbi [off-list ref] wrote:

quoted

On Tue, Sep 09, 2014 at 07:19:50AM +0530, Vivek Gautam wrote:

quoted

Hi,


On Mon, Sep 8, 2014 at 7:14 PM, Felipe Balbi [off-list ref] wrote:

quoted

Hi,

On Mon, Sep 08, 2014 at 09:53:09AM +0530, Vivek Gautam wrote:

quoted

On Fri, Sep 5, 2014 at 11:26 PM, Felipe Balbi [off-list ref] wrote:

quoted

On Thu, Sep 04, 2014 at 12:01:19PM +0530, Vivek Gautam wrote:

quoted

quoted

Don't we have phy_power_on()
for that ? It looks like you could just as well do this from
phy_power_on() ?

No, unfortunately keeping these calibration settings in phy_power_on()
doesn't help, since we need to do this after XHCI reset has happened.

teach xHCI about PHYs ?

sorry i couldn't understand you here.
Aren't we trying to do the same with Heikki's patch about dwc3 :
[PATCH 6/6] usb: dwc3: host: convey the PHYs to xhci

and the 2nd patch in this series :
[PATCH v6 2/4] usb: host: xhci-plat: Get PHYs for xhci's hcds

Is there something else that is expected ?

right, use that to call phy_init() at the right time, then you need to
add a new ->calibrate() method which, likely, will only be used by you
;-)

so you mean, the xhci should itself call phy_init() at a time suitable,
so that ->calibrate() is not required at all ?

but wait, dwc3 does a phy_init() already, then how xhci will be able to
do that again. We can't do phy_init() multiple times right ?

right. I think we should split and do phy ops separately for dwc3 host
and gadget?

no, don't do that. We need a better way of handling this. As of now we
don't support dual-role, so we can just reinitialize the PHY once we
reach xhci.

Once we start supporting dual-role, we will need more inteligence in the
algorithm.

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140911/95110e05/attachment-0001.sig>