[PATCH v3 5/8] rtc: at91sam9: make use of syscon/regmap to access GPBR registers
From: johan@kernel.org (Johan Hovold)
Date: 2014-09-11 09:43:05
Also in:
linux-devicetree, linux-rtc, lkml
On Thu, Sep 11, 2014 at 10:56:04AM +0200, Boris BREZILLON wrote:
The GPBR registers are not part of the RTT block and thus should not be defined in the reg property of the rtt node. Use syscon to provide a proper DT representation and reference the GPBR syscon device in a new "atmel,time-reg" property which store both the syscon device phandle and the register offset within the GPBR block. When using non DT boards, we won't be able to retrieve the syscon regmap, hence we need to create our own regmap using the memory region defined in the 2nd memory resource assigned to the RTT platform device. Signed-off-by: Boris BREZILLON <redacted> Conflicts: drivers/rtc/rtc-at91sam9.c
You probably don't want this here.
quoted hunk ↗ jump to hunk
--- drivers/rtc/Kconfig | 1 + drivers/rtc/rtc-at91sam9.c | 58 +++++++++++++++++++++++++++++++++++++++------- 2 files changed, 50 insertions(+), 9 deletions(-)diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index a168e96..7d76da8 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig@@ -1081,6 +1081,7 @@ config RTC_DRV_AT91RM9200 config RTC_DRV_AT91SAM9 tristate "AT91SAM9x/AT91CAP9 RTT as RTC" depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40) + select MFD_SYSCON help RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT (Real Time Timer). These timers are powered by the backup powerdiff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index d72c34d..b953545 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c@@ -21,6 +21,8 @@ #include <linux/slab.h> #include <linux/platform_data/atmel.h> #include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> /* * This driver uses two configurable hardware resources that live in the@@ -72,7 +74,8 @@ struct sam9_rtc { void __iomem *rtt; struct rtc_device *rtcdev; u32 imr; - void __iomem *gpbr; + struct regmap *gpbr; + unsigned int gpbr_offset; int irq; };@@ -81,10 +84,18 @@ struct sam9_rtc { #define rtt_writel(rtc, field, val) \ writel((val), (rtc)->rtt + AT91_RTT_ ## field) -#define gpbr_readl(rtc) \ - readl((rtc)->gpbr) -#define gpbr_writel(rtc, val) \ - writel((val), (rtc)->gpbr) +static inline unsigned int gpbr_readl(struct sam9_rtc *rtc) {
Brace placement. Did you run checkpatch on the rest of the series? Johan