[PATCH 1/6] ARM: mvebu: Add required ethernet muxing for the Armada 370 SoC
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
Date: 2014-08-10 12:16:32
On 08/08/2014 05:18 PM, Ezequiel Garcia wrote:
quoted hunk ↗ jump to hunk
This commit adds the required pin muxing for the two network interfaces and the MDIO interface, to the Armada 370 SoC. Signed-off-by: Ezequiel Garcia <redacted> --- arch/arm/boot/dts/armada-370.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 21b588b..b0700bf6 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi@@ -151,6 +151,25 @@ "mpp62", "mpp60", "mpp58"; marvell,function = "audio"; }; + + mdio_pins: mdio_pins {
Ezequiel,
please keep me posted next time ;)
Above should be: mdio_pins: mdio-pins {
same for the ones below.
+ marvell,pins = "mpp17", "mpp18"; + marvell,function = "ge";
As we haven't used it before, we could still rename "ge" function to more approprate "mdio"... but it is ok. Besides the comments, Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ };
+
+ ge0_pins: ge0_pins {
+ marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11", "mpp12",
+ "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "ge0";
+ };
+
+ ge1_pins: ge1_pins {
+ marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
+ "mpp23", "mpp24", "mpp25", "mpp26",
+ "mpp27", "mpp28", "mpp29", "mpp30";
+ marvell,function = "ge1";
+ };
};
gpio0: gpio at 18100 {