[PATCH] mfd: max77686: make interrupts support optional

Hi,

On Wednesday, August 20, 2014 10:29:39 AM Javier Martinez Canillas wrote:

Hello Lee, Marek,

On 08/20/2014 10:19 AM, Lee Jones wrote:

quoted

On Wed, 20 Aug 2014, Marek Szyprowski wrote:

quoted

Commit 6f1c1e71d93 ("mfd: max77686: Convert to use regmap_irq") broke
support for boards, which provide no irq for MAX 77686 PMIC. In such
case, not all functions of PMIC are available, but the driver still
should at least handle voltage regulators instead of failing to init.
This patch restores previous behavior.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
Hello,

This patch fixes booting issues with recently merged support for
Exynos4412 based Odroid X2/U3 boards. See
http://www.spinics.net/lists/linux-samsung-soc/msg35773.html
thread for more details.

Best regards
Marek Szyprowski
Samsung R&D Institute Poland

I already gave my opinion about this patch on thread:

"[PATCH v2 0/4] Add Exynos4412 based Odroid X2 and U2/U3/U3+ support"

where the issue was reported by Olof but I'll add it here as well for
completeness since I don't know if the same people are cc'ed on both threads.

Bartlomiej Zolnierkiewicz posted a similar patch [0] before but as I said

BTW my patch a bit simpler than this one.

regmap_del_irq_chip() checks for second argument being NULL so it is not
needed to explicitly check for max77686->irq not being zero on probe
failures before calling regmap_del_irq_chip().

on that thread, I'm not sure if is correct to make that DT property
optional. Or rather, if we need to make it optional then we should also
change the Documentation/devicetree/bindings/mfd/max77686.txt that list
"interrupts" DT property as required.

It's true that before converting the max77686 to use the regmap irq API,
the driver was loose on that regard but max77686_irq_init() in
max77686-irq.c was returning -ENODEV when the IRQ was not provided and
that error code was not checked in max77686_i2c_probe() (which was a bug
IMHO).

More importantly I wonder if a design where a IRQ line is not connected to
the max77686 PMIC makes even sense. If such a design is possible then the
"interrupt" property should be made optional but if not then I think that
the driver should fail to probe in that case. Yes, it is a regression but
the Odroid DTS was not following the DT binding and was just lucky that
the driver was not checking the required DT properties.

Daniel Drake posted the correct fix for the Odroid DTS [1]. So I tend to
say that Daniel's fix should be added as a -rc fix and we should keep both
the max77686 driver and its DT binding as it is now but as I said, if from
a hardware point of view makes sense to leave that line unconnected then I
don't oppose to this change.

Best regards,
Javier

[0]: https://lkml.org/lkml/2014/8/7/374
[1]:
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/272869.html

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics