[PATCH RESEND v2 4/7] ARM: dts: vf610: Add usbmisc for non-core registers
From: stefan@agner.ch (Stefan Agner)
Date: 2014-08-18 20:08:42
Also in:
lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add device tree node for usbmisc which controls the non-core USB registers. This is required to use the property to disable the over- current detection. Signed-off-by: Stefan Agner <stefan@agner.ch> --- arch/arm/boot/dts/vf610.dtsi | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index f36acb5..a49d739 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi@@ -334,11 +334,17 @@ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC0>; fsl,usbphy = <&usbphy0>; + fsl,usbmisc = <&usbmisc0 0>; dr_mode = "peripheral"; status = "disabled"; }; - + usbmisc0: usb at 40034800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x40034800 0x200>; + clocks = <&clks VF610_CLK_USBC0>; + }; }; aips1: aips-bus at 40080000 {
@@ -407,10 +413,18 @@ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC1>; fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; dr_mode = "host"; status = "disabled"; }; + usbmisc1: usb at 400b4800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x400b4800 0x200>; + clocks = <&clks VF610_CLK_USBC1>; + }; + ftm: ftm at 400b8000 { compatible = "fsl,ftm-timer"; reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
--
2.0.4