On 13/08/14 11:12, Mikko Perttunen wrote:

On 13/08/14 11:07, Thierry Reding wrote:

quoted

* PGP Signed by an unknown key

On Tue, Aug 05, 2014 at 11:12:57AM +0300, Mikko Perttunen wrote:

quoted

Hi,

this series adds support for hardware-triggered thermal reset to the PMC
driver. Namely, it adds device tree properties for specifying the I2C
command to be sent when thermtrip is triggered. It is to be noted
that thermtrip won't be ever triggered without a soctherm driver to
calibrate the sensors, but I'll follow up with that patch.

pmc.c required some juggling around to make the match data usable in
probe, since I didn't want to put the code into the initcall either, since
the soctherm driver won't be initialized by that point anyway.

Series tested on Jetson-TK1. Should work on Tegra30 and Tegra114 too.

Can you describe the procedure used to test this? We currently have a
bunch of features in Tegra that some people have tested at some point
during development but the test procedures never got documented. That
means whenever we want to test something we need to go and reinvent a
bunch of tests after the fact.

So what I'd like to start doing is collect tests (preferably in some
scripted way) so that they can be kept in a repository that people can
easily clone and run on devices.

Could you provide something like that for thermtrip?

Sure. I'll see if I can make a just a test script or if a local patch is
needed to test. Btw, I also have a pretty nice test script for EMC
ready, and I agree that such a repository would be very nice.

Here is a test program. It it works, the device with immediately shut down.

https://gist.github.com/cyndis/66126c9c176b5f94a76f

quoted

Thierry

* Unknown Key
* 0x7F3EB3A1

Cheers, Mikko
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html