Thread (6 messages) 6 messages, 2 authors, 2014-08-30

[PATCH v6 2/2] dt-bindings: document Rockchip saradc

From: jic23@kernel.org (Jonathan Cameron)
Date: 2014-08-07 14:15:56
Also in: linux-devicetree, linux-iio, lkml

On 23/07/14 22:24, Heiko St?bner wrote:
This add the necessary binding documentation for the saradc found in all recent
processors from Rockchip.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Applied to the togreg branch of iio.git.
I have exercised a small amount of discretion wrt to the standard 3 weeks
as there really is very little different in here from previous versions
and no one has raised any comments on them.

It's nearly 3 weeks anyway!

J
quoted hunk ↗ jump to hunk
---
changes since v5:
- remove clock-frquency property as described in patch 1/2

 .../bindings/iio/adc/rockchip-saradc.txt           | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
new file mode 100644
index 0000000..5d3ec1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
@@ -0,0 +1,24 @@
+Rockchip Successive Approximation Register (SAR) A/D Converter bindings
+
+Required properties:
+- compatible: Should be "rockchip,saradc"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+              depends on the interrupt controller.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for
+               the peripheral clock.
+- vref-supply: The regulator supply ADC reference voltage.
+- #io-channel-cells: Should be 1, see ../iio-bindings.txt
+
+Example:
+	saradc: saradc at 2006c000 {
+		compatible = "rockchip,saradc";
+		reg = <0x2006c000 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		#io-channel-cells = <1>;
+		vref-supply = <&vcc18>;
+	};
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help